Latest your-freedom settings with MTN 2012


MTN is back again on Your-freedom. With the latest yourfreedom you’ll be able to browse the internet free without being charged. Download the latest version of your-freedom from HERE and OpenVPN from HERE with your 3G enabled phone or Modem you’ll be able to enjoy fast internet with MTN on Your-freedom.

The settings below will guide you through

Steps 1

  1. Download your-freedom from HERE and OpenVPN from HERE
  2. If you don’t have a Your-freedom account then you’ll have to register from HERE
  3. After Downloading and Registering, you’ll then need to install the Your-freedom and OpenVPN
  4. After installation [Its time we configure Your-freedom]

Step 2

Dont worry there are pictures here aswell to guide through on configuring your-freedom

  • First thing you’ll have to do is to set your-freedom to run as admin by:
    1. Right click on the “Your-freedom icon” in desktop
    2. Click “Property”
    3. Click on “Compatibility” TAB
    4. Tick “RUN this program as an Administrator”
    5. Click “OK” then you’re good for that step
    6. Do the same for OpenVPN aswell

  • Open your-freedom and click on Ports on the tab and tick the following:
    1. SOCKS 4/5 port
    2. Web Proxy Port
    3. OpenVPN port
    4. Use UDP for OpenVPN
  • After the above then Goto Messages tab and tick the following:
    • Auto scroll
    • Minimum Level: set to “DEBUG”

  • Under the Application tabs you will be able to Configure what ever application you see there that you have installed in your system, you can execute that by:
    1. Tick what ever apps/software  you wish to configure
    2. Don’t get scared it will help you configure them automatically.
    3. Select “Configure your applications to use YF”
    4. Click “OK” and then watch your apps being configured Automatically.

Step 3

This is the last part of the configuration

  • Click Status on the tab and then Configure.

  • WOW, what is….. Dont worry not all tabs are needed here just three(3) tabs are needed here.
  • Under “YF Server”
    1. Address:
    2. Port: 53
    3. Connection mode: DNS
    4. Tweaks: Nigeria MTN
  • Under “Options” the following should be ticked: (3,5,6,7,8)
    1. Reconnect after server shutdown
    2. SOCKS4/5 DNS lookups on server
    3. Enable encryption
    4. Enable re-keying
    5. Use true SSL with HTTPS
    6. Minimum buffer size: 1500
    7. Reconnection delay: 5000
    8. Initial POST size: 10000000
    9. Minimum POST size: 20000
    10. FTP mode: both
    11. SSL protocol version: any
  • Under “Settings” tab
    1. Tick “Do not show pop-up windows
  • And the last, click “Account Information”
    1. Under “Account Details, Here you get to insert the username/password that you used in registering/opening an account at yourfreedom website.
    2. “Username: and Password” you used in registering at Your-Freedom website are need .

  • Click on “SAVE and EXIT” below. Exit the program, connect your modem and open your freedom and click on “Start Connection”

Wow this is easier than i tought. “I know.”

Hope this was Helpful and dont forget to subcribe and hit the like 🙂


Bookmark the permalink.

Comments are closed